2024 John Deere R Series Zero Turn Mowers Z994R Diesel 60 in FastBack™ PRO

Information

2024 John Deere R Series Zero Turn Mowers Z994R Diesel 60 in FastBack™ PRO

Features may include:

Powerful 24.7-hp (18.4-kW) diesel engine delivers superior performance and efficiency
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
  • Deck is forged from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break - it is forged from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
  • Extra reliability and long life with cast-iron blade spindle housings.
  • Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
  • Control lever provides the ability to easily lock out fore/aft suspension movement if desired.

Photos

Highlights

  • Belleville, Ontario
  • 2024
  • John Deere
  • R Series Zero Turn Mowers Z994R Diesel 60 in FastBack™ PRO
  • Dual hydrostatic wheel drive TuffTorq heavy-duty ground drive with cross porting for improved cooling
  • Diesel or Biodiesel (up to B20)
  • Available
  • With chute down: 188, 218 cm (74, 86 in) | Rear discharge: 161.3, 192.5 cm (63.5, 75.8 in)
  • With ROPS up: 185 cm (73 in) | With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) / 2.54-14 cm (1-5.5 in)

Specifications

  • 2024
  • John Deere
  • R Series Zero Turn Mowers
  • Z994R Diesel 60 in FastBack™ PRO
  • Zero-Turn Mower
  • 3TNV80F
  • PS: 18.4 kW (24.7 hp)
  • Gross at 3,200 rpm
  • Three
  • 1.27 L (77.3 cu in.)
  • Full pressure
  • Liquid
  • Pre-cleaner Yes Heavy-duty canister, dry type with safety element and air-restriction indicator
  • Operator presence starting system: Brake-N-Go (foot)
  • Fuel tank switch/shut-off valve
  • Diesel or Biodiesel (up to B20)
  • Drive: V-belt | Electric clutch
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Zero turn
  • Dual hydrostatic wheel drive TuffTorq heavy-duty ground drive with cross porting for improved cooling
  • Dynamic braking: Twin motion control levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Foot brake engagement also brings steering levers to the neutral position
  • Caster wheels: 13x6.5-6 | Caster wheel: 13x5.0-6 flat free | Drive wheels: 24x12.00-12 4-ply turf
  • Anti-scalp rollers: RH, center, LH
  • Anti-scalp rollers: Standard
  • 24x12.00-12 4-ply turf | Load rating: 4PR
  • 12 V
  • Cold cranking amp: At 18 degrees C, 600 amp | Hour meter: Digital multi-function display
  • 75 amp
  • Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr)
  • Side discharge: approximately 16,000 fpm | Blade tip speed: Approximately 16,500 fpm | Speed range: 0-18.3 km/h (0-11.4 mph) | Forward: 0-18.3 km/h (0-11.4 mph ) | Reverse: 0-7.2 km/h (0-4.5 mph)
  • Full flow, replaceable, spin-on type | Drivetrain: Internal, replaceable
  • Mower deck size: 152-cm (60-in) | Blades Thickness: 0.64 cm (0.25 in)
  • 152, 183 cm (60, 72 in)
  • 225 cm (88.6 in) (Varies by deck size)
  • With chute down: 188, 218 cm (74, 86 in) | Rear discharge: 161.3, 192.5 cm (63.5, 75.8 in)
  • With ROPS up: 185 cm (73 in) | With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) / 2.54-14 cm (1-5.5 in)
  • 5.6 L (5.9 U.S. gal)
  • Tank: 43.5 L (11.5 U.S. gal.)
  • Blade Number: Three | Mower deck: FastBack™ PRO rear-discharge
  • 776 to 821 kg (1,711 to 1,810 lb)
  • 7-gauge: 4.6-mm (0.179-in.) one-piece forged steel
  • 36 months or 1500 hours, whichever comes first, no hour limitation for the first 24 months.