2024 John Deere M Series Z960M 72 in

Information

2024 John Deere M Series Z960M 72 in

Features may include:

Powerful 31-hp (23.1-kW) commercial-grade engine delivers class-leading performance and efficiency
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
  • Better fuel efficiency
Available Mulch On Demand™ deck
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles
  • Deluxe comfort seat with armrests
  • Deluxe comfort seat with armrests and isolation
  • Fully adjustable suspension seat with armrests

Photos

Highlights

  • Belleville, Ontario
  • 2024
  • John Deere
  • M Series Z960M 72 in
  • Hydrostatic
  • Gasoline
  • Available
  • With chute down: 173, 188, 218 cm (68, 74, 86 in) / Rear discharge: 192.5 cm (75.8 in)
  • With ROPS up: 185 cm (73 in) / With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) 2.54-14 cm (1-5.5 in)

Specifications

  • 2024
  • John Deere
  • M Series
  • Z960M 72 in
  • Zero-Turn Mower
  • FX921V
  • 23.1 kW (31 hp)
  • Gross at 3,600 rpm
  • Two
  • 999 cc (61 cu in)
  • Full pressure
  • Air
  • Pre-cleaner Yes Heavy-duty canister type with safety element
  • Operator presence starting system: Brake-N-Go (hand)
  • Gasoline
  • Drive: V-belt | Electro-magnetic, 225 lb-ft 305 Nm
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
  • Hydrostatic
  • Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
  • Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
  • Anti-scalp rollers: RH, center, LH
  • Anti-scalp rollers: Standard
  • 24x12-12 | Load rating: 4 PR
  • 12 V
  • Cold cranking amp: 300 amp | Hour meter: Standard, digital
  • 20 amp
  • Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr )
  • Blade tip speed: Approximately 18,500 fpm | Speed range 0-16.1 km/h (0-10 mph) | Forward 0-16.1 km/h (0-10 mph) | Reverse: 0-7.2 km/h (0-4.5 mph )
  • Full flow, replaceable
  • Mower deck size: 183-cm (72-in) | Blades Thickness: 0.64 cm (0.25 in)
  • 152, 183 cm (60, 72 in)
  • 213 cm (84 in)
  • With chute down: 173, 188, 218 cm (68, 74, 86 in) / Rear discharge: 192.5 cm (75.8 in)
  • With ROPS up: 185 cm (73 in) / With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) 2.54-14 cm (1-5.5 in)
  • 5.6 L (5.9 U.S. qt)
  • Tank: 43.5 L (11.5 U.S. gal)
  • Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
  • 591 to 640 kg (1,304 to 1,412 lb)
  • 7-gauge: 4.6-mm (0.179-in.) one-piece forged steel
  • 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation