2024 John Deere M Series Z950M 60 in 7Iron™ PRO Mulch
- Year 2024
- Make John Deere
- Model M Series
2024 John Deere M Series Z950M 60 in 7Iron™ PRO Mulch
2024 John Deere M Series Z950M 60 in 7Iron™ PRO Mulch
Features may include:
Powerful 27-hp (20.1-kW) commercial-grade engine delivers class-leading performance and efficiency- Overhead valve design
- More horsepower and torque per cubic inch of displacement
- Better fuel efficiency
- Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
- Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
- Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
- Deluxe comfort seat with armrests
- Deluxe comfort seat with armrests and isolation
- Fully adjustable suspension seat with armrests
Engine
Engine Manufacturer
FX850V
Engine Power
20.1 kW (27 hp)
Rated Engine Speed
Gross at 3,600 rpm
Cylinder Liners
Two
Displacement
852 cc (52 cu in)
Lubrication
Full pressure
Cooling
Air
Air Cleaner
Pre-cleaner Yes Heavy-duty canister type with safety element
Starter
Operator presence starting system: Brake-N-Go (hand)
Fuel System
Fuel Type
Gasoline
PTO
PTO Type
Drive: V-belt | Electro-magnetic: 305 Nm (225 lb-ft )
Drivetrain
Drive System
Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
Transmission
Hydrostatic
Brakes
Brake System Type
Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
Wheels & Tires
Wheels
Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
Front Wheel
Anti-scalp rollers: RH, center, LH
Rear Wheel
Anti-scalp rollers: Standard
Tires, Rear Specification
24x12-12 | Load rating: 4 PR
Battery
Battery
12 V
Electric
Electrical
Cold cranking amp: 300 amp | Hour meter: Standard, digital
Charging System
20 amp
Operational
Operating Conditions
Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr)
Operating Speed
Blade tip speed: Approximately 18,500 fpm | Speed range: 0-16.1 km/h (0-10 mph) | Forward: 0-16.1 km/h (0-10 mph) | Reverse: 0-7.2 km/h (0-4.5 mph)
Hydraulics
Oil Filter
Internal, replaceable
Dimensions
Cutting Width
137, 152, 183 cm (54, 60, 72 in)
Length
213 cm (84 in)
Width
With chute down: 173, 188, 218 cm (68, 74, 86 in) / Rear discharge: 192.5 cm (75.8 in)
Height
With ROPS up: 185 cm (73 in) / With ROPS down: 119 cm (47 in) | Of-cut range: Increments 0.64 cm (0.25 in) 2.54-14 cm (1-5.5 in)
Dimensions
Mower deck size: 152-cm (60-in) | Blades Thickness: 0.64 cm (0.25 in)
Capacities
Hydraulic Capacity
5.6 L (5.9 U.S. qt)
Fuel Capacity
Tank: 43.5 L (11.5 U.S. gal.)
Features
Crankcase: With filter 2.3 L (2.4 U.S. qt)
Weights
Weight
588 to 627 kg (1,296 to 1,383 lb)
Features
Construction Material, Deck
7-gauge: 4.6-mm (0.179-in. ) one-piece forged steel
Features
Blade Number: Three | Mower deck: 7Iron™ PRO Mulch On Demand™
Warranty
Warranty
36 months or 1200 hours, whichever comes first First 24 months, no hour limitation