2024 John Deere M Series Z920M 60 in
- Year 2024
- Make John Deere
- Model M Series
2024 John Deere M Series Z920M 60 in
2024 John Deere M Series Z920M 60 in
Features may include:
Powerful 23.5-hp (17.5-kW) commercial-grade engine delivers class-leading performance and efficiency- Overhead valve design
- More horsepower and torque per cubic inch of displacement
- Better fuel efficiency
- Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
- Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
- Mulch On Demand decks are superior to aftermarket chute blockers due to the movable baffles.
- Three-year, bumper-to-bumper warranty
- An exclusive 2-year, unlimited hour/3-year, 1200-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.
Engine
Engine Manufacturer
FX730V
Engine Power
17.5 kW (23.5 hp)
Rated Engine Speed
Gross at 3,600 rpm
Cylinder Liners
Two
Displacement
726 cc (44.3 cu in)
Lubrication
Full pressure
Cooling
Air
Air Cleaner
Pre-cleaner Yes Heavy-duty canister type with safety element
Starter
Operator presence starting system: Brake-N-Go (hand)
Fuel System
Fuel Type
Gasoline
PTO
PTO Type
Drive: V-belt | Electro-magnetic, 200 lb-ft 271 Nm
Drivetrain
Drive System
Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Twin levers
Transmission
Hydrostatic
Brakes
Brake System Type
Dynamic braking: Twin levers | Park brake: Internal wet disk integrated in the transmission | Park brake actuation: Hand brake
Wheels & Tires
Wheels
Caster wheel type: Flat free | Drive wheels: 24x12-12 | Caster wheels: 13x6.5-6
Front Wheel
Anti-scalp rollers: RH, center, LH
Rear Wheel
Anti-scalp rollers: Standard
Tires, Rear Specification
24x12-12 | Load rating: 4 PR
Battery
Battery
12 V
Electric
Electrical
Cold cranking amp: 300 amp | Hour meter: Standard, digital
Charging System
20 amp
Operational
Operating Conditions
Consumption: 4.2-7.2 L/hr (1.1-1.9 U.S. gal./hr)
Operating Speed
Blade tip speed: 7Iron PRO: Approximately 18,500 fpm | Travel speed: Speed range 0-16.1 km/h (0-10 mph) | Forward: 0-16.1 km/h (0-10 mph) | Reverse: 0-7.2 km/h (0-4.5 mph) | Blade tip speed: 7Iron PRO: Approximately 18,500 fpm | Speed range: 0-16.1 km/h (0-10 mph)
Hydraulics
Oil Filter
Full flow, replaceable
Dimensions
Cutting Width
122, 137, 152 cm (48, 54, 60 in)
Length
213 cm (84 in)
Width
With chute down: 157, 173, 188 cm (62, 68, 74 in)
Height
With ROPS up: 185 cm (73 in) | With ROPS down: 119 cm (47 in) | Of-cut range: Increments: 0.64 cm (0.25 in) 2.54-14 cm (1-5.5 in)
Dimensions
Mower deck size: 152-cm (60-in) | Blades Thickness: 0.64 cm (0.25 in)
Capacities
Hydraulic Capacity
5.6 L (5.9 U.S. qt)
Fuel Capacity
Tank: 43.5 L (11.5 U.S. gal.)
Features
Crankcase capacity: With filter 1.9 L (2 U.S. qt )
Weights
Weight
557 to 596 kg (1,228 to 1,313 lb)
Features
Construction Material, Deck
7-gauge: 4.6-mm (0.179-in) one-piece forged steel
Features
Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
Warranty
Warranty
36 months or 1200 hours, whichever comes first First 24 months, no hour limitation