Deerhaven

Specifications

• 2018 John Deere 2025R Base
• Year2018
• ManufacturerJohn Deere
• Model Name2025R
• Trim NameBase
• Generic Type (Primary)Compact
• Engine ManufacturerYanmar 3TNV80F-NCJT
• Engine TypeDiesel
• Engine PowerRated: 17.8 kW (23.9 hp)
• Rated Engine Speed3200 rpm
• DisplacementCylinders: 3 / 1.267 L (3 / 77 cu in.)
• Injection Pump TypeIndirect injection
• AspirationNatural
• Bore80 mm (3.2 in.)
• Stroke84 mm (3.3 in.)
• Compression Ratio23:01
• LubricationPressurized
• Cooling SystemWater pump
• Air CleanerDual element
• Engine Torqueat rated speed: 53 Nm (39.09 lb-ft)
• Final DriveType: Spur Gear
• Fuel System
• Fuel Usage, 100% Load5.8 L/hr (1.5 U.S. gal./hr)
• Fuel TypeIndirect injection
• PTO
• PTO Typepower: 13.4 kW 18 hp
• Standard PTORear - 540 rpm | Mid - 2100 rpm
• Drivetrain
• TransmissionStandard transmission; forward/reverse: Hydrostatic - 2 range | Left-hand reverser: No | Final drive: Spur Gear | Brakes: Wet disc | Cruise control: Standard | Differential lock
• Hydraulics
• Hydraulic TypeOpen center
• Hydraulic Flowrated output: Steering 13.25 L/min (3.5 gpm) | Implement: 13.25 L/min (3.5 gpm), 26.5 L/min (7.0 gpm)
• SteeringPower steering
• Pump TypeGear
• Maximum PressureOperating: 148.2 bar (2150 psi)
• Electric
• Battery500 CCA
• Alternator12-V: 40 amp
• StarterSize: 1.2 kW (1.6 hp)
• Wheels & Tires
• Tires, Rear SpecificationR3 Turf - 31x13.5-15 R4 | Industrial - 12-16.5 R3 | Radial - 280/70-R16
• Tires, Front SpecificationR3 Turf - 23x8.50-12 R4 | Industrial - 23x8.50-12 R3 | Radial - 220/55-R12
• Axle Capacity, Front612 kg (1349 lb)
• Axle Capacity, Rear1100 kg (2425 lb)
• DimensionsFront axle clearance: 316 mm (12.5 in.) | Turning radius without brakes: 2.65 m (8.7 ft) | Front tread range: 95.3 cm 37.5 in.
• Wheelbase1600 mm (63 in.)
• Capacities
• Fuel Capacity23.8 L (6.3 gal.)
• Hitch Lift Capacity3 Point category: Limited Category 1 | 24-in. behind link arms 400 kg (882 lb)
• Oil capacityCrankcase with filter: 2.7 L (2.9 qt)
• Weights
• WeightApproximate shipping (open-station; cab): 813.5 kg (1793.4 lb)
• FeaturesEmissions compliance: Final Tier 4 | Number of cylinders: Three | Cylinder liners: Cast-in-block | Draft control sensing: Position control | Remote control valves available: Two | PTO Control: Independent | Clutch: Wet disc | Brake (for mid and rear PTO): Wet disc | Rollover protective structure: Type Foldable OSHA, SAE, ASAE | Platform - flat/straddle: Three-piece semi flat | Gear shift location - console/floor: Left-hand side | Toolbox | Tilt steering wheel