Information
- Width:60 in
- Engine Type:Gas
- air ride seat
Highlights
- $11,950.00
- Glencoe
- Pre-Owned
- 2019
- John Deere
- Z930M 54
- FX801V
- 25
- 357
- Hydrostatic
- Gasoline
- Available
- With chute down: 68 in (173 cm)
Specifications
- 2019
- John Deere
- Z930M
- 54
- Riding
- FX801V
- Gross At 3,600 rpm: 25.5 hp (19 kW)
- 52 cu in. (852 cc)
- Two
- Full flow, replaceable
- Full pressure
- Air
- Pre-cleaner, Yes, Heavy-duty canister type with safety element
- Gasoline
- Electro-magnetic, 225 lb-ft (305 Nm) | Drive: V-belt
- Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
- Hydrostatic
- Dynamic: Twin levers
- Internal wet disk integrated in the transmission | actuation: Hand brake
- Drive: 24x12-12 | Load rating: 4 PR
- type: Flat free | size: 13x6.5-6 | Front anti-scalp rollers: RH, center, LH
- 12 V
- 20 amp
- Cold cranking amp: 300 amp
- Speed range: 0-10 mph (0-16.1 km/h) | Travel, Forward: 0-10 mph (0-16.1 km/h) | Travel, Reverse: 0-4.5 mph (0-7.2 km/h)
- Speed and direction control: Twin levers | Filter: Internal, replaceable
- Blades, Tip Approximately: 18,000 fpm (5,486 m/min)
- 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) Under normal conditions, load, operation, and dependent on loads and operating conditions
- 7-Iron PRO, one-piece stamped steel with reinforcements
- 7 gauge 0.18 in. (4.6 mm)
- Side, MOD
- Blades Thickness: 0.25 in. (0.64 cm) | Mower deck: 54 in (137 cm)
- With chute down: 68 in (173 cm)
- 0.25 in. (0.64 cm), 1-5.5 in. (2.54-14 cm)
- 73 in. (185 cm) | With ROPS down: 47 in. (119 cm)
- 54 in (137 cm)
- 84 in. (213 cm) | Blades: Varies by deck size
- 5.9 U.S. qt (5.6 L) | Crankcase With filter: 2 U.S. qt (1.9 L)
- 11.5 U.S. gal. (43.5 L)
- 1,275 to 1,365 lb (578 to 619 kg)
- Fuel tank switch/shut-off valve | Hour meter: Standard, digital | Operator presence starting system: Brake-N-Go (hand)
- Three
- 36 months or 1200 hours, whichever comes first, First 24 months, no hour limitation
