Cyclonic V-twin engine is smooth running and powerful
The 22-hp (16.4-kW) V-twin engine used in the S220 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Large, 44.2-cu in. (724-cc) displacement
Plenty of torque helps to get the job done fast.
Large displacement engine increases the ability to get an even cut without mowing a second time.
Camshaft and carburetor designs create the optimum torque rise for rapid response to varying load conditions.
Electronic ignition for fast starts
Cast-iron sleeves for longer engine life
Overhead valves for excellent power and fuel economy
Full-pressure lubrication and oil filter for keeping the oil cleaner for a long engine life and extending the time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
Excellent serviceability with easily replaced air filter, fuel filter, and oil filter and a convenient oil-drain hose to make draining the oil easy and clean
CYCLONIC AIR FILTER
Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:
Cyclonic design ejects large dirt particles before they contact the filter.
Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.
SERVICEABILITY
The engine oil check and fill tube are conveniently located for easy access. An oil drain hose makes draining oil easy and clean.
The replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.
Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.
FLYWHEEL ALTERNATOR
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
14-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging
FUEL TANK
The capacity is 2.4 U.S. gal. (9.1 L).
The fuel filler opening is conveniently located under the seat.
Filling the tank without spilling is easy.
A tethered fuel tank cap is more convenient.
The sealed fuel cap helps keep vapors inside the tank.
with mower: 1270 mm (50 in.) | with mower (deflector raised for storage): 1244 mm (49 in.) | without mower: 1015 mm (40 in.)
Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1143 mm (45 in.)
Specifications
2024
John Deere
200 Series
S220
Riding
model: 44J6 Cyclonic
16.4 kW (22 hp)
724 cc (44.2 cu in.)
Overhead valve, full-pressure lube, oil filter
V-twin, cast-iron liners
Mechanical
method: Air
Pleated paper cartridge filter with poly pre-filter
Bendix type
delivery: Pulse pump and carburetor
Gasoline | Fuel tank location: Rear
Mechanical, viewable from seat
Separate levers, automatic choke return
Sector and pinion with single drag link and tie rod
Mower: Manual power take-off (PTO) clutch | Mower attachability: Single V-belt
Internal wet disk
20x10-8
15x6-6
Mower: Two
12 V / 300 CCA
Flywheel alternator, regulated, 14 amp
Forward: 0-8.9 km/h (0-5.5 mph) / Reverse speed: 0-5.2 km/h (0-3.2 mph)
mounting: CargO Mount™ system
Full-length welded steel
Headlights: Two standard, incandescent
Backup protection: Reverse Implement Option (RIO)
Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel design, diameter : 30.5 cm (12 in.) | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 12 gauge 2.7 mm (0.105 in. )
Accel Deep™ mower deck: 42 in. (107 in.)
45.7 cm (18 in. ) | Uncut: 61 cm (24 in.)
38.1 cm (15 in.)
Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1143 mm (45 in.)
1908 mm (75.1 in.)
1242 mm (48.9 in.)
with mower: 1270 mm (50 in.) | with mower (deflector raised for storage): 1244 mm (49 in.) | without mower: 1015 mm (40 in.)
tank: 9.1 L (2.4 U.S. gal.)
Maximum: 227 kg (500 lb)
218 kg (481 lb)
Transaxle type: TLT200 hydrostatic, two-wheel drive | Transaxle control Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Storage: Storage tray with cover | Mower deck: Side discharge | Mower wash port: Yes, with hose end | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Internal, not replaceable
system: Spring-assisted hand-grip lever
Front axle: Cast iron front axle, front wheel sealed ball bearings | Hood: Molded-in color material reduces sound, will not rust or dent | Mower deck: Stamped steel deck shell
Fender: Stamped steel
Two piece with open-back | Seat suspension: Tilt, two rubber isolators
Mower adjustment: One bolt | Mower level adjustment: Easy-level deck