2024 John Deere X500 Select Series X590

48" DECK, 25.5 HP, WARRANTY IS 4 YEARS/ 500 HOUR, PLUS TAXES
MoreLess
Limited Time Offer!

Selling Price -$13,667.00

2024 John Deere X500 Select Series X590

  • 25.5-hp (19.0 kW) iTorque™ Power System
  • Electronic throttle control and power two-wheel steer

Features may include:

V-twin engine has electronic fuel injection (EFI) and electronic throttle control for quick starts and superior performance

The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design providing superior lugging ability, even cooling, and durability. Key engine features include:

  • 25.5 hp (19 kW)
  • Large 44.3-cu in. (726-cc) displacement
  • V-twin air-cooled design
  • Excellent power and performance
  • Smooth, quiet power
  • Easy starts

Quality features include:

  • Cast-iron cylinder liners
  • Overhead valves
  • Full-pressure lubrication
  • Replaceable oil filter
  • Dual-stage air cleaner
  • Solenoid-shift starter for easy starts, even in cold weather
  • Electronic fuel injection (EFI)
  • EFI meters the correct amount of fuel directly into each engine cylinder for all operating conditions.
  • It simplifies engine starts and warm-up by eliminating the need for the operator to use a choke.
  • Fuel usage is reduced up to 10 percent compared to a carbureted engine.
  • Electronic throttle control
  • Electronic throttle control works in conjunction with EFI to electronically adjust the supply of fuel air mixture, to increase torque as needed to maintain engine operating speed under load.
  • Ground speed and mower blade-tip speed remain constant, even in heavy-grass conditions, to improve productivity and cut quality.
  • Mechanical governors cannot respond fast enough to maintain a constant engine speed.
  • Some torque rise remains to warn the operator before the engine stalls.
  • X590 Tractor's electronic throttle control is a first in the mowing industry.
ELECTRONIC FUEL INJECTION AND ELECTRONIC THROTTLE CONTROL

No choke control is needed for the EFI engine because a servo motor controls the intake air butterfly valve and the air stream. For cold starts, the actuator closes the valve, making starting the engine easier - no choke lever is needed. Starts are quick and easy, even for inexperienced operators.

The advanced engine features provide the following advantages:

  • Electronic throttle control improves performance.
  • Mowing time is reduced as the electronic throttle control keeps the engine operating at optimum speed, responding instantaneously as the mower transitions from light to heavy mowing.
  • Cut quality is improved, especially in difficult mowing conditions, because the electronic throttle control keeps the mower blades turning at full speed, delivering optimal cut quality and dispersion of clippings. While snow blowing, maintaining the fan speed enables consistent snow placement.
EFI increases uptime.

Fast, reliable starts are routine just like with a modern automobile. EFI automatically meters fuel, including the extra fuel needed to start a cold engine. Flooding by unnecessary choking of a warm engine is eliminated. No carburetor adjustments are needed at altitude.

  • No choke-related problems since the choke is eliminated, thus ensuring operator confidence and quick starts, even in cold ambient temperatures (snow blower use). The mechanical throttle cable is replaced by an electric linkage that is not susceptible to wear or freezing.
  • Cost of ownership is reduced.
  • EFI precisely meters fuel to each engine cylinder.
  • 2024
  • John Deere
  • X500 Select Series
  • X590
  • Riding
  • Model: FS730 EFI
  • 19 kW (25.5 hp)
  • 726 cc (44.3 cu in.)
  • Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • V-twin, cast-iron liners
  • Constant-speed electronic throttle control
  • method: Air
  • Dry, replaceable with foam precleaner
  • Solenoid shift
  • delivery: Open-loop electronic fuel injection (EFI)
  • Gasoline | tank location: Rear
  • Gauge on dash
  • speed control: No choke required
  • Power, hydraulic | Tilt wheel: five position
  • Mower: Electric power take-off (PTO) clutch, in-line belt | Mower attachability: Dual belts
  • Internal wet disc
  • 24x12-12 turf
  • 16x6.5-8 turf
  • Mower: Four
  • 12 V / 340 CCA
  • Flywheel alternator, regulated, 24 amp
  • Forward: 0-11.6 km/h (0-7.2 mph) | Reverse: 0-8.4 km/h (0-5.2 mph)
  • mounting: Yes, heavy duty
  • Welded heavy-duty
  • Headlights: Two standard, incandescent, 27 W | Taillights or reflector: Reflectors
  • Backup protection: Reverse Implement Option (RIO)
  • Fuel fill opening On left fender: 7.6 cm (3 in.) | Steering wheel: 35.6 cm (14 in.) | Fore-aft adjustment - While seated, ball bearing slide rail, 15-position: 17 cm (6.6 in.) | Mower deck material: 10 gauge 3.4 mm (0.135 in.) | Mower wheels rotate: 90 degrees for easy mower removal
  • Accel Deep™ mower deck: 122 cm (48 in.)
  • 55.9 cm (22 in.) | Uncut circle: 68.6 cm (27 in.)
  • back: 53 cm (21 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1338 mm (52.7 in.)
  • 1966 mm (77.4 in.)
  • 1300 mm (51.2 in.)
  • with mower: 1590 mm (62.6 in.) | with mower (deflector raised for storage): 1335 mm (52.6 in.) | without mower: 1034 mm (40.7 in.)
  • tank: 16.7 L (4.4 U.S. gal.)
  • Maximum: 363 kg (800 lb)
  • bracket- front and rear - each holds up to four Quik-Tatch: 19 kg (42 lb) | 352 kg (776 lb)
  • Transaxle type: K72 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Cruise control: Yes, button on dash | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Yes, covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor | Front draft arms: Attached with spring pins at two points | Rear draft arms: Quick-pull pins
  • change: No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Yes, replaceable
  • Hydraulic | system type: Foot pedal with adjustable spring assist
  • Front axle: Cast iron front axle, front wheel ball bearings | Spindle bushings: Metal, replaceable | Hood: Fully enclosed, molded-in color material reduces sound, will not rust or dent | Mower deck: Forged steel deck shell
  • Fender: Stamped steel
  • Cut-and-sewn high-back | suspension: Six-position parallel arm
  • Mower Wheel: Seven-position, spring-loaded pin | Mower level: Exact Adjust ports and deck-leveling gauge
  • 4 year/500 hour bumper-to-bumper
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $13,667.00
  • Belleville
  • New
  • 2024
  • John Deere
  • X500 Select Series X590
  • Model: FS730 EFI
  • mounting: Yes, heavy duty
  • Gasoline | tank location: Rear
  • Available
  • with mower: 1590 mm (62.6 in.) | with mower (deflector raised for storage): 1335 mm (52.6 in.) | without mower: 1034 mm (40.7 in.)
  • Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1338 mm (52.7 in.)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.