Limited Time Offer!
Selling Price -$5,091.00
2023 John Deere 200 Series S240 48 in
- 21.5 HP V-Twin Engine
- 48-in. (122-cm) Accel Deep™ Deck
- Comfortable 15-in (38-cm) open back seat
- Side-by-side forward and reverse pedals
- K46 heavy-duty hydrostatic transmission
- Easy read fuel gauge
Features may include:
Engine is powerful and smooth-running premium V-twin design- The S240 Tractor has a large 44.3-cu in. (726-cc) displacement engine with premium features that provide superior performance and reliability:
- Large cleanout ports, integrated into the engine shroud, are located over the cylinder heads to allow for easy inspection and removal of any debris that may have collected there.
- Premium engine oil and air filtering systems and cooling design provide increased reliability and engine life.
- The 21.5-hp (16-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
- V-twin cylinder design for greater torque, lower vibration, and improved sound quality
- Electronic ignition for fast starts
- Cast-iron cylinder liners for longer engine life
- Overhead valves for excellent power and fuel economy
- Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
- Also more effective when operating the tractor on an incline
- In-line fuel filter for reliable operation
- The engine speed lever and choke control lever are separate controls:
- The engine speed lever is easy to use - there is no need to worry about pushing too far and engaging the choke as on single throttle/choke lever systems.
- The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.
- Engine hood opens wide for easy access to service points:
- It is easy to inspect and clean the engine area.
- Important service points are exposed.
- Cleanout ports designed into the engine shroud make cleaning the engine cooling fins easy.
- The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
- FUEL TANK
- Capacity is 2.4 U.S. gal. (9.08 L).
- Fuel-filler opening is conveniently located under the seat.
- Filling the tank without spilling is easy.
- The tethered fuel tank cap is more convenient.
- The sealed fuel cap helps keep vapors inside the tank.
- The 48-in. (122-cm) Accel Deep Mower Deck is a forged-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:
- 4.83-in. (12.3-cm) depth throughout the entire deck shell allows for optimum mowing, mulching, and bagging performance.
- Forged-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance.
- Mower deck is suspended from the vehicle for a smooth and level cut.
- Adjustable mower wheels positioned just above ground level help reduce scalping.
- 0.25-in. (6.4-mm) cut-height increments allow mower to be set at the desired cut height
- 2024
- John Deere
- 200 Series
- S240 48 in
- Riding
- Model: FR651V
- 16.0 kW (21.5 hp)
- 726 cc (44.3 cu in.)
- Overhead valve, full-pressure lube, oil filter
- V-twin, cast-iron liners
- Mechanical
- method: Air
- Dry, replaceable
- Bendix type
- delivery: Pulse pump and carburetor
- Gasoline | Fuel tank location: Rear
- Easy-read on dash
- Separate levers, automatic choke return
- Sector and pinion with single drag link and tie rod
- Mower: Electric power take-off (PTO) clutch | Mower attachability: Single V-belt
- Internal wet disk
- 20x10-8
- 15x6-6
- Mower: Four
- 12 V / 300 CCA
- Flywheel alternator, regulated, 12 amp
- Forward: 0-8.9 km/h (0-5.5 mph) / Reverse speed: 0-5.2 km/h (0-3.2 mph)
- mounting: CargO Mount™ system
- Full-length welded steel
- Headlights: Two standard, incandescent | Taillights or reflector: Reflectors
- Backup protection: Reverse Implement Option (RIO)
- Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel design, diameter: 35.6 cm (14 in.) | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 10 gauge 3.4 mm (0.135 in.)
- Accel Deep™ mower deck: 122 cm (48 in.)
- 45.7 cm (18 in. ) | Uncut With 48A: 47 cm (18.5 in.)
- 38.1 cm (15 in.)
- Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1143 mm (45 in.)
- 1908 mm (75.1 in.)
- 1242 mm (48.9 in.)
- with mower: 1600 mm (63 in.) | with mower (deflector raised for storage): 1372 mm (54 in.) | without mower: 1000 mm (39.4 in)
- tank: 9.1 L (2.4 U.S. gal.)
- Maximum: 227 kg (500 lb)
- 237 kg (522 lb)
- Transaxle type: K46 heavy-duty hydrostatic, two-wheel drive | Transaxle control: Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Storage: Storage tray with cover | Fender handles/grips: Handgrips | Mower deck: Side discharge | Mower wash port: Yes, with hose end | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
- No-tools oil drain with replaceable filter | cooler: Fins and fan on transaxle | filter: Internal, not replaceable
- system: Spring-assisted hand-grip lever
- Front axle: Cast iron front axle, front wheel sealed ball bearings | Hood: Molded-in color material reduces sound, will not rust or dent | Mower deck: Forged steel deck shell
- Fender: Stamped steel
- Open-back design with grasp | Seat suspension: Tilt, two rubber isolators
- Mower adjustment: One bolt | Mower level adjustment: Easy-level deck
- 3-year/200-hour bumper-to-bumper
- $5,091.00
- Belleville
- New
- 2024
- John Deere
- 200 Series S240 48 in
- Model: FR651V
- mounting: CargO Mount™ system
- Gasoline | Fuel tank location: Rear
- Available
- with mower: 1600 mm (63 in.) | with mower (deflector raised for storage): 1372 mm (54 in.) | without mower: 1000 mm (39.4 in)
- Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | increments: 0.64 cm (0.25 in.) | 1143 mm (45 in.)