Limited Time Offer!
Selling Price -$4,823.00
Selling Price -
$4,823.00
2023 John Deere 100 Series S180
- 24 hp (17.9 kW) V-Twin Extended Life Series (ELS) Engine
- 54-in. Edge™ Mower Deck
- Electric PTO, Heavy Duty Hydrostatic Transmission w/side-by-side pedals
- Easy Change™ 30-Second Oil Change System for fast and convenient service
- Adjustable lumbar seat and standard front bumper
- Easy to read fuel gauge
Features may include:
Engine is powerful and smooth-running V-twin design- A 24-hp (17.9-kW) V-twin extended-life series (ELS) engine provides plenty of power and torque to handle tough mowing, mulching, and bagging:
- Includes ELS engine features for enhanced performance and longer life
- V-twin cylinder design for greater torque, lower vibration, and improved sound quality
- Electronic ignition for fast starts
- Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
- Cast-iron cylinder liners for longer engine life
- Overhead valves for excellent power and fuel economy
- Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
- More effective when operating the tractor on an incline
- FUEL TANK
- The capacity is 2.4 U.S. gal. (9.1 L).
- The fuel filler opening is conveniently located under the seat.
- Filling the tank without spilling is easy.
- A tethered fuel tank cap is more convenient.
- The sealed fuel cap helps keep vapors inside the tank.
- The John Deere Easy Change 30-second oil change system makes changing the engine oil easy, quick, and clean. Changing the oil is as easy as twisting on a new oil-filled filter. Oil does not need to be drained from the engine.
- The John Deere Easy Change filter is an additional engine oil reservoir. Changing the filter removes the captured contaminants and replaces about 0.8 qt (0.76 L) of engine oil.
- The functionality does not stop with ease of use. The Easy Change oil system has several meaningful benefits over the traditional oil filter system of the 100 Series:
- A synthetic filter material is used for more predictable filtering and longer life.
- Filtering capacity is greater than with a standard oil filter.
- More filter surface area
- More oil flow capacity
- The system has 40 percent more oil volume.
- The oil and engine run cooler.
- The oil filter valve closes whenever the engine stops, so filtered particles are captured and cannot drain back into the engine.
- Partly due to these improvements, it is not necessary to remove and dispose of all the oil in the engine during service.
- Everyone who uses the John Deere Easy Change system saves time and avoids the mess of a traditional oil change. In the past, many 100 Series Lawn Tractor owners rarely or never got around to changing their engine oil. With the 30-second oil change, even people who previously would not consider changing the oil themselves can easily do it. The Easy Change system is a no-mess, no-fuss solution the competition cannot match.
- Installation instructions are in the Operator’s Manual and in the John Deere Easy Change service part box.
- This full-featured engine is engineered to deliver world-class endurance and power.
- 2024
- John Deere
- 100 Series
- S180
- Riding
- Model: 44U877 (M44) | Overhead valve, full-pressure lube, oil filter
- 17.9 kW (24 hp)
- 724 cc (44.2 cu in.)
- V-twin - extended life series (ELS)
- method: Air
- Cartridge with prefilter
- Bendix type
- delivery: Pulse pump and carburetor
- Gasoline
- Easy-read on dash
- Transaxle: Hydrostatic, 2-wheel drive
- Mechanical
- Single lever with spring-return on choke
- Sector and pinion with single drag link and tie rod
- Mower: Electric power take-off (PTO) clutch | Mower attachability: Single belt
- Internal wet disk
- 12 V / 300 CCA
- Regulated, 14 amp
- 22x9.5-12
- 16x6.5-8
- Mower: Five
- Forward: 0-8.9 km/h (0-5.5 mph) | Reverse: 0-5.2 km/h (0-3.2 mph)
- mounting: CargO Mount™ system
- Full-length welded steel
- Two standard, incandescent | Taillights or reflector: Reflectors
- Backup protection: Reverse Implement Option (RIO)
- Fuel fill opening Center: 4.45 cm (1.75 in.) | Steering wheel Deluxe, diameter: 35.6 cm (14 in.) | Fore-aft adjustment - While seated: 14 cm (5.5 in.) | Mower deck material: 3 mm (0.120 in.)
- Edge™ mower deck: 137 cm (54 in.)
- 45.7 cm (18 in.) | Uncut circle: 45.7 cm (18 in.)
- back: 38 cm (15 in.)
- Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1160 mm (45.7 in.)
- 1913 mm (75.3 in.)
- 1242 mm (48.9 in.)
- with mower: 1702 mm (67 in.) | with mower (deflector raised for storage): 1313 mm (51.7 in.) | without mower: 996 mm (39.2 in.)
- tank: 9.1 L (2.4 U.S. gal.)
- Maximum: 227 kg (500 lb)
- 239 kg (526 lb)
- Transaxle type: K46 heavy-duty hydrostatic, two-wheel drive | Transaxle control: Side-by-side pedals | Fuel tank location: Rear | Transaxle: Side-by-side pedals | Primer/paint: E-coat/powder | Floor mats: Yes, with debris removing channels | Storage: Storage tray with cover | Fender handles/grips: Handgrips | Mower deck: Side discharge | Mower attachability: Slide under tractor | Front draft arms: One spring clip | Rear draft arms: Two spring clips
- change: Easy Change™ 30-second oil change system | cooler: Fins and fan on transaxle | filter: Yes, not serviceable
- system type: Spring-assisted hand-grip lever
- Front axle: Cast iron front axle, front wheel sealed ball bearings | Hood material: Molded-in color material reduces sound, will not rust or dent
- Fender deck: Stamped steel | Mower deck: Steel | Mower: Steel, 12 gauge
- One piece with lumbar adjustment | suspension: Tilt, two coil springs
- Mower adjustment: One bolt | Mower level adjustment: Easy-level deck
- 2 year/120 hour bumper-to-bumper
- $4,823.00
- Belleville
- New
- 2024
- John Deere
- 100 Series S180
- Model: 44U877 (M44) | Overhead valve, full-pressure lube, oil filter
- mounting: CargO Mount™ system
- Gasoline
- Available
- with mower: 1702 mm (67 in.) | with mower (deflector raised for storage): 1313 mm (51.7 in.) | without mower: 996 mm (39.2 in.)
- Mower cut: 13 positions, 2.5-10.2 cm (1-4 in.) | Cut increments: 0.64 cm (0.25 in.) | 1160 mm (45.7 in.)