Limited Time Offer!
Selling Price -CALL FOR PRICING
Selling Price -
CALL FOR PRICING
2022 John Deere 3 Series 3043D
- Standard 4wd for Maximum Traction
- Heavy duty drive train with a gear drive transmission 8F/8R
- On-board diagnostics including Service Advisor
- Category 1 3-Pt Hitch compatible with dozens of attachments
Features may include:
Reliable gear-driven transmission provides optimum tractor performance- The 3D Tractors are available with a gear drive transmission with eight speeds in both forward and reverse directions. It includes a drivetrain built with heavy-duty components like those used in some John Deere utility tractors. These components ensure a rugged and durable machine.
- The spiral bevel gear of the 3D machine is larger in diameter than comparable tractors.
- Column-mounted forward and reverse lever for increased efficiency and comfort when changing directions.
- Fender-mounted gear shift lever for more comfortable shifting
- The tractor will only start with the forward/reverse, range, and gear shift levers in neutral.
- The engine will shut off if the operator leaves the seat unless the forward/reverse, range, and gear shift levers are in neutral.
- The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged.
- Key John Deere advantage - A column-mounted forward/reverse lever is a more ergonomic alternative to the floor-mounted design of the competition. Having controls at the operator’s fingertips allows for an effortless change in directions at any time.
- The 3D is much easier and more comfortable to operate when shifting between gears. The fender-mounted gear shift lever provides the ideal location and placement for the operator’s arm.
- An uncluttered design gives operators of all sizes plenty of room to be comfortable. Color-coded controls are located on either side of the operator.
- Contoured, comfortable seat enhances operator comfort.
- Seat position adjusts fore and aft
- Seat flips forward for protection from the elements
- Flat operator platform provides for easy entry to/exit from the tractor.
- Folding Roll-Gard™ rollover protective structure (ROPS) and retractable seat belt increase operator safety.
- Operator presence system:
- If the operator leaves the seat when the forward/reverse and range lever are in gear, the engine shuts down.
- If the operator leaves the seat when the power take-off (PTO) is engaged, the engine shuts down.
- The left-side step allows for easy access on and off the tractor.
- Foot platform has a non-skid surface for sure footing.
- The thick, soft padding on this seat provides a smooth and comfortable ride.
- Seat flips forward for protection from the elements.
- Adjustable using the fore and aft lever located under the seat, the seat slides on ramped rails to provide comfortable access to all controls.
- Easy-to-read instrument panel includes the following:
- Tachometer
- Low oil pressure indicator light
- Battery discharge indicator light
- PTO engagement indicator light
- Signal/hazard lamp indicator lights
- Multifunction liquid crystal display (LCD) display (hours, filter cleaning information, PTO speed, etc.)
- Filter cleaning status indicator light
- 2022
- John Deere
- 3 Series
- 3043D
- Compact
- Model: 3TNV86CT-KJPT
- Yanmar®
- Gross: 31 kW (42.2 hp) | Starter size: 1.9 hp (1.4 kW)
- At rated speed: 78 lb-ft (105.7 Nm)
- 2400 rpm
- 95.8 cu in. (1.57 L)
- Turbocharged
- Final Tier 4
- Three | Cast-in-block
- 3.39 in (86 mm)
- 3.54 in. (90 mm)
- 19.1:1
- Pressurized
- Liquid
- Dual element
- High pressure common rail direct injection
- Power take-off (PTO) power: 36.3 hp (27.1 kW) | At 2400 rpm: 540 rpm
- Control: Mechanical
- 8F/8R synchromesh shuttle shift gear transmission
- Bull Gear
- Ranges: Four gears and two ranges
- Transmission
- Power steering
- Wet disk | for mid and rear PTO: Wet disk
- Farm - 7-14 / Turf - 27x8.5-15 / R4 - 25x8.5-14
- Farm - 11.2-24 / Turf - 41x14-20 / R4 - 15-19.5
- 600 CCA
- 55 amp
- Open center
- Rated output: Steering - 4.4 gpm (16.8 L/min) | Implement - 5.9 gpm (22.4 L/min) / 10.3 gpm (39.2 L/min)
- Single gear
- 2495 psi (172 bar)
- Category 1
- Front axle clearance: 35 cm (14 in.)
- 62 in. (1574 mm)
- With brakes: 5.3 ft (1.63 m)
- 24-in. behind link arms: 757.4 kg (1670 lb)
- 9.7 U.S. gal. (36.7 L)
- 1940 lb (880 kg)
- 3527 lb (1600 kg)
- Transmission: 34.8 qt (33 L)
- Crankcase with filter: 4.8 qt (4.5 L)
- (open-station; cab): 1288 kg (2840 lb)
- Draft control sensing: Position control | Rollover protective structure: Foldable / ASABE S478 | Platform - flat/straddle: Straddle | Gear shift location - console/floor: Right-hand side
- Belleville
- New
- B016122
- 2022
- John Deere
- 3 Series 3043D
- Model: 3TNV86CT-KJPT
- 8F/8R synchromesh shuttle shift gear transmission
- Available